Share:
Brackish water reverse osmosis flat sheet membrane
The A-Series, family of proprietary thin-film reverse osmosis membranes, are characterized by high flux and high sodium chloride rejection. AG Standard Brackish Water membrane is selected when high rejection and operating gage pressures as low as 200 psi (1400 kPa) are desired. The membrane allows moderate energy saving and is considered a standard in the industry. AK Low Pressure Brackish Water membrane is selected when high rejection and low operating pressures are desired. The membrane is specifically designed for the home-reverse osmosis application and allows significant energy saving since good rejection is achieved at operating gage pressures as low as 70 psi (500 kPa). AL High Flux, Low Pressure Brackish Water membrane is selected when high rejection and low operating pressures are desired. The membrane allows excellent flow and energy saving with good rejection achieved at operating gage pressures as low as 60 psi (300 kPa). AP Extremely Low Pressure Brackish Water membrane is selected when high rejection and very low operating pressures are desired. The membrane allows extreme energy saving since good rejection is achieved at operating gage pressures as low as 45 psi (300 kPa). About After Treatment These flat sheet membrane rolls are washed, dried, and ready for rolling spiral wound elements with customer desired configurations. Preservation The membrane is shipped dried, wrapped in black plastic. Ship only via air-freight or temperature controlled carrier. Store it in a dry place below 77ºF (25ºC) covered with a material that light cannot penetrate.
Inquiry - VEOLIA - A-Series Membrane
